Version 6.82 Release Candidate 3 Available...

This is the place to help test and discuss Version 6 Beta releases.

Version 6.82 Release Candidate 3 Available...

Postby dexter » Sun Nov 17, 2019 9:29 pm

Two more fixes for 6.82. Here is the third Release Candidate:

Changes:

  • Fixed issue where the disk free popup would pop spuriously.
  • Fixed issue where MP3 files after repair would sometimes be deleted after moving to MP3 mode folders.

Download link is on the Beta Page.
User avatar
dexter
Site Admin
Site Admin
 
Posts: 9470
Joined: Fri May 18, 2001 3:50 pm
Location: Northern Virginia, US

Registered Newsbin User since: 10/24/97

Re: Version 6.82 Release Candidate 3 Available...

Postby Voyager62 » Mon Nov 18, 2019 3:13 am

Quade wrote:You mean it focuses on a particular line?

Yes, it actually selects the line as if you clicked on it. Here is a video of the behavior in RC2, but I've confirmed the same behavior in RC3.

https://youtu.be/T97dJ-9jniA
Voyager62
Seasoned User
Seasoned User
 
Posts: 124
Joined: Sat Nov 05, 2005 8:57 am

Registered Newsbin User since: 10/29/04

Re: Version 6.82 Release Candidate 3 Available...

Postby depredador » Mon Nov 18, 2019 6:55 am

Voyager62 wrote:
Quade wrote:You mean it focuses on a particular line?

Yes, it actually selects the line as if you clicked on it. Here is a video of the behavior in RC2, but I've confirmed the same behavior in RC3.

https://youtu.be/T97dJ-9jniA

I always assumed this was just some new feature but could not figure out what it did.
depredador
Seasoned User
Seasoned User
 
Posts: 110
Joined: Sat Sep 20, 2008 11:49 pm
Location: Australia

Registered Newsbin User since: 09/25/08

Re: Version 6.82 Release Candidate 3 Available...

Postby Quade » Mon Nov 18, 2019 12:41 pm

Yeah, 750 Mbps, things move pretty fast. I'll have to think about it.
User avatar
Quade
Eternal n00b
Eternal n00b
 
Posts: 43778
Joined: Sat May 19, 2001 12:41 am
Location: Virginia, US

Registered Newsbin User since: 10/24/97

Re: Version 6.82 Release Candidate 3 Available...

Postby Voyager62 » Mon Nov 18, 2019 5:07 pm

Quade wrote:Yeah, 750 Mbps, things move pretty fast. I'll have to think about it.

Okay, thanks Quade.
Voyager62
Seasoned User
Seasoned User
 
Posts: 124
Joined: Sat Nov 05, 2005 8:57 am

Registered Newsbin User since: 10/29/04

Re: Version 6.82 Release Candidate 3 Available...

Postby TheGlade » Sat Dec 07, 2019 6:32 pm

With the latest 2 RCs I often get a few of these errors. But downloading goes fine:

Code: Select all
[12/07 22:20:28]  ERROR BR: Read Failure: 16384 to read 0 Actual Read Code: 18446744071562145803
[12/07 22:20:28]  ERROR BR: Read Failure - Would Block
[12/07 22:20:28]  ERROR Downloader: SocketException NEWS SERVER ERROR: <newsserver> NNTPServer: zero bytes read from socket <newsserver>
[12/07 22:20:28]  ERROR BR: Read Failure: 16384 to read 0 Actual Read Code: 18446744071562145803
[12/07 22:20:28]  ERROR BR: Read Failure - Would Block
[12/07 22:20:28]  ERROR Downloader: SocketException NEWS SERVER ERROR: <newsserver> NNTPServer: zero bytes read from socket <newsserver>
[12/07 22:20:28]  ERROR BR: Read Failure: 16384 to read 0 Actual Read Code: 18446744071562145803
[12/07 22:20:28]  ERROR BR: Read Failure - Would Block
[12/07 22:20:28]  ERROR Downloader: SocketException NEWS SERVER ERROR: <newsserver> NNTPServer: zero bytes read from socket <newsserver>
[12/07 22:20:28]  ERROR BR: Read Failure: 16384 to read 0 Actual Read Code: 18446744071562145803
[12/07 22:20:28]  ERROR BR: Read Failure - Would Block
[12/07 22:20:28]  ERROR Downloader: SocketException NEWS SERVER ERROR: <newsserver> NNTPServer: zero bytes read from socket <newsserver>
[12/07 22:20:28]  ERROR BR: Read Failure: 16384 to read 0 Actual Read Code: 18446744071562145803
[12/07 22:20:28]  ERROR BR: Read Failure - Would Block
[12/07 22:20:28]  ERROR Downloader: SocketException NEWS SERVER ERROR: <newsserver> NNTPServer: zero bytes read from socket <newsserver>
[12/07 22:20:28]  ERROR BR: Read Failure: 16384 to read 0 Actual Read Code: 18446744071562145803
[12/07 22:20:28]  ERROR BR: Read Failure - Would Block
[12/07 22:20:28]  ERROR Downloader: SocketException NEWS SERVER ERROR: <newsserver> NNTPServer: zero bytes read from socket <newsserver>
[12/07 22:20:28]  ERROR BR: Read Failure: 16384 to read 0 Actual Read Code: 18446744071562145803
[12/07 22:20:28]  ERROR BR: Read Failure - Would Block
[12/07 22:20:28]  ERROR Downloader: SocketException NEWS SERVER ERROR: <newsserver> NNTPServer: zero bytes read from socket <newsserver>

Is this harmful? Or can it be ignored?
TheGlade
Occasional Contributor
Occasional Contributor
 
Posts: 17
Joined: Sun Aug 20, 2006 4:53 pm

Registered Newsbin User since: 09/20/05

Re: Version 6.82 Release Candidate 3 Available...

Postby Quade » Sun Dec 08, 2019 2:10 am

I probably need to suppress that error. Zero bytes read means the server end is disconnecting. Some of them do that after some number of bytes is sent over the connection. it's not really an error.
User avatar
Quade
Eternal n00b
Eternal n00b
 
Posts: 43778
Joined: Sat May 19, 2001 12:41 am
Location: Virginia, US

Registered Newsbin User since: 10/24/97

Re: Version 6.82 Release Candidate 3 Available...

Postby depredador » Thu Dec 12, 2019 6:11 pm

When I go to kill all connections it now stops downloading and the only way to get it to resume is to exit Newsbin and then open it again.
depredador
Seasoned User
Seasoned User
 
Posts: 110
Joined: Sat Sep 20, 2008 11:49 pm
Location: Australia

Registered Newsbin User since: 09/25/08

Re: Version 6.82 Release Candidate 3 Available...

Postby Frodoger » Sat Dec 28, 2019 6:10 am

The Sort for Error Messages in the "Failed Files" Tab doesnt Work in the actual Build 5133.
Frodoger
Occasional Contributor
Occasional Contributor
 
Posts: 22
Joined: Sat Sep 11, 2004 12:09 pm

Registered Newsbin User since: 07/31/03

Re: Version 6.82 Release Candidate 3 Available...

Postby Frodoger » Sat Dec 28, 2019 6:25 am

Quade wrote:I probably need to suppress that error. Zero bytes read means the server end is disconnecting. Some of them do that after some number of bytes is sent over the connection. it's not really an error.

no. Not supress. Comment the error. I always want to know what newsbin do at this moment, when the download speed is not as aspected
Frodoger
Occasional Contributor
Occasional Contributor
 
Posts: 22
Joined: Sat Sep 11, 2004 12:09 pm

Registered Newsbin User since: 07/31/03

Re: Version 6.82 Release Candidate 3 Available...

Postby Voyager62 » Mon Dec 30, 2019 12:36 am

It looks like the problem with the downloading post being selected when others are being selected has been fixed, but the problem with Newsbin unpausing after unRARing a post still hasn't. This happens even if "Pause Download during UnRAR/Repair" isn't checked. Is it possible you are automatically unpausing and not checking the status of that option first?

Thanks.

Update: build 5142
Voyager62
Seasoned User
Seasoned User
 
Posts: 124
Joined: Sat Nov 05, 2005 8:57 am

Registered Newsbin User since: 10/29/04

Re: Version 6.82 Release Candidate 3 Available...

Postby Quade » Mon Dec 30, 2019 4:15 pm

Newsbin notes the pause status before the unrar starts. Then when the unrar completes, it tries to restore the pause state. If you pause after the unrar starts, the pause state becomes stale. So it restores the state to the state from before the unrar started.

What I'm going to do, is if "autopause" is disabled, it'll not change the pause state. That will solve the immediate issue but IF you have pause during unrar enabled, you'll still run into this timing issue.
User avatar
Quade
Eternal n00b
Eternal n00b
 
Posts: 43778
Joined: Sat May 19, 2001 12:41 am
Location: Virginia, US

Registered Newsbin User since: 10/24/97

Re: Version 6.82 Release Candidate 3 Available...

Postby Voyager62 » Mon Dec 30, 2019 4:19 pm

Quade wrote:What I'm going to do, is if "autopause" is disabled, it'll not change the pause state. That will solve the immediate issue but IF you have pause during unrar enabled, you'll still run into this timing issue.


Thank you. That is what I thought was happening and, with a gigabit connection, it is almost impossible to time it exactly between UnRAR events.
Voyager62
Seasoned User
Seasoned User
 
Posts: 124
Joined: Sat Nov 05, 2005 8:57 am

Registered Newsbin User since: 10/29/04

Re: Version 6.82 Release Candidate 3 Available...

Postby Ronbyram » Wed Mar 11, 2020 6:33 am

Is Newsbin Beta still holding at release 6.82 rc 3? has updates scheule been changed? Just wondering?
Ronbyram
Occasional Contributor
Occasional Contributor
 
Posts: 28
Joined: Mon Aug 06, 2007 7:08 am

Registered Newsbin User since: 02/12/07

Re: Version 6.82 Release Candidate 3 Available...

Postby fidodkk » Thu Mar 12, 2020 1:28 pm

Ronbyram check this thread:

viewtopic.php?f=44&t=47514
fidodkk
n00b
n00b
 
Posts: 4
Joined: Sun Apr 08, 2018 8:49 pm
Location: Denmark

Re: Version 6.82 Release Candidate 3 Available...

Postby Quade » Thu Mar 12, 2020 5:00 pm

6.82 is the current release.

http://www.newsbin.com/freetrial.php
User avatar
Quade
Eternal n00b
Eternal n00b
 
Posts: 43778
Joined: Sat May 19, 2001 12:41 am
Location: Virginia, US

Registered Newsbin User since: 10/24/97


Return to Newsbin Version 6 Beta Support

Who is online

Users browsing this forum: Google [Bot] and 6 guests