NZB files shows zero headers when loaded

Technical support and discussion of Newsbin Version 6 series.

NZB files shows zero headers when loaded

Postby Chuck D. Bones » Wed Aug 16, 2017 12:38 am

I searched and searched for this topic in this forum and didn't find it. What causes an NZB file to appear empty when I open it in NBpro 6.80B5? If I open the NZB in notepad, it looks valid (to my untrained eye). Filters are disabled. This happens with some, but not all NZBs. Some NZBs were downloaded from a newsgroup, others from Usenet Crawler.
Thanks,
Chuck

It is hard enough to remember my opinions, without also remembering my reasons for them!
- Friedrich Nietzsche
User avatar
Chuck D. Bones
Active Participant
Active Participant
 
Posts: 52
Joined: Sat Jul 05, 2003 1:46 pm
Location: Somewhere in L.A.

Registered Newsbin User since: 04/03/03

Re: NZB files shows zero headers when loaded

Postby Quade » Wed Aug 16, 2017 1:05 pm

You can email some of the bad ones to ts@newsbin.com.

If you look at the logs do you see any errors during load?
User avatar
Quade
Eternal n00b
Eternal n00b
 
Posts: 44867
Joined: Sat May 19, 2001 12:41 am
Location: Virginia, US

Registered Newsbin User since: 10/24/97

Re: NZB files shows zero headers when loaded

Postby Chuck D. Bones » Wed Aug 16, 2017 1:41 pm

No errors or messages of any kind in the log when I load a *zero* NZB. I emailed it just now.

Thanks,
Chuck

It is hard enough to remember my opinions, without also remembering my reasons for them!
- Friedrich Nietzsche
User avatar
Chuck D. Bones
Active Participant
Active Participant
 
Posts: 52
Joined: Sat Jul 05, 2003 1:46 pm
Location: Somewhere in L.A.

Registered Newsbin User since: 04/03/03

Re: NZB files shows zero headers when loaded

Postby Quade » Thu Aug 17, 2017 8:59 am

I tested it in the latest beta, B6 and when I loaded it onto a post list the files showed up. How about trying B6?
User avatar
Quade
Eternal n00b
Eternal n00b
 
Posts: 44867
Joined: Sat May 19, 2001 12:41 am
Location: Virginia, US

Registered Newsbin User since: 10/24/97

Re: NZB files shows zero headers when loaded

Postby Chuck D. Bones » Thu Aug 17, 2017 4:00 pm

Just installed B7 and still no posts show when I load the NZB file: <something>.s02e09.hdtv.x264-sva-Obfuscated.nzb

The filters (green button) are disabled. My servers are Newshosting, Astraweb & Tweaknews. No errors logged when I load the NZB. Could there be something in my settings that would filter the posts? Is there something i should check in the settings menu or in the newsbin.nbi file?

Thanks,
Chuck

It is hard enough to remember my opinions, without also remembering my reasons for them!
- Friedrich Nietzsche
User avatar
Chuck D. Bones
Active Participant
Active Participant
 
Posts: 52
Joined: Sat Jul 05, 2003 1:46 pm
Location: Somewhere in L.A.

Registered Newsbin User since: 04/03/03

Re: NZB files shows zero headers when loaded

Postby dexter » Thu Aug 17, 2017 5:00 pm

Check your Global Filter Profile for something that might be filtering this stuff out. That filter profile applies all the time.

BTW, I edited your post, please don't list what you are downloading publicly.
User avatar
dexter
Site Admin
Site Admin
 
Posts: 9511
Joined: Fri May 18, 2001 3:50 pm
Location: Northern Virginia, US

Registered Newsbin User since: 10/24/97

Re: NZB files shows zero headers when loaded

Postby Chuck D. Bones » Thu Aug 17, 2017 5:51 pm

Thanks for the heads-up. Global Filter is set to 0 KB, 0 KB, 0 and None. No accept or reject criteria, so basically no filtering. I noticed in Newsbin.nbi an entry under [NZB] that said: NZB_ObeyGlobal=1. Changing it to NZB_ObeyGlobal=0 also made no difference. I tried other NZB files; some show posts and some don't.

Where should I look next? Does it matter which servers I use?

Thanks,
Chuck

It is hard enough to remember my opinions, without also remembering my reasons for them!
- Friedrich Nietzsche
User avatar
Chuck D. Bones
Active Participant
Active Participant
 
Posts: 52
Joined: Sat Jul 05, 2003 1:46 pm
Location: Somewhere in L.A.

Registered Newsbin User since: 04/03/03

Re: NZB files shows zero headers when loaded

Postby Quade » Thu Aug 17, 2017 11:39 pm

If you go into the NZB options you have nothing set for "NZB Loading Filter"?

It's a pretty normal NZB, The the spool_v6 folder in the data you might try deleting the "BASIC_SEARCH" folder.
User avatar
Quade
Eternal n00b
Eternal n00b
 
Posts: 44867
Joined: Sat May 19, 2001 12:41 am
Location: Virginia, US

Registered Newsbin User since: 10/24/97

Re: NZB files shows zero headers when loaded

Postby Chuck D. Bones » Thu Aug 17, 2017 11:54 pm

NZB loading filter is set to: None.

I quit NBp, deleted the "BASIC_SEARCH" folder,started NBp up again, loaded the NZB and still no posts displayed.

Thanks,
Chuck

It is hard enough to remember my opinions, without also remembering my reasons for them!
- Friedrich Nietzsche
User avatar
Chuck D. Bones
Active Participant
Active Participant
 
Posts: 52
Joined: Sat Jul 05, 2003 1:46 pm
Location: Somewhere in L.A.

Registered Newsbin User since: 04/03/03

Re: NZB files shows zero headers when loaded

Postby Same Guy » Sun Jan 28, 2018 11:50 am

Hi everyone - was this ever resolved because I am having the same issue?

I download a nzb from binsearch or nzbgeek and then open it in newsbin pro, nothing shows. I see cache 200/200 (0) at the bottom of the screen, but the nzb tab shows (0).

When I import the nzb to Agent, it shows the headers and I can download them in Agent with no problem, but Agent is far too slow for that. In the past I used to create another nzb in Agent from the imported headers and then open the newly created nzb in newsbin pro and it would work. Today, nothing.

I'm running 6.73 x64 on Win 7 Ultimate SP1 and I deleted all filter profiles I had created plus disabled the spam filters.

Any ideas?
Same Guy
Occasional Contributor
Occasional Contributor
 
Posts: 11
Joined: Tue Oct 24, 2006 8:37 pm

Registered Newsbin User since: 09/05/06

Re: NZB files shows zero headers when loaded

Postby Quade » Sun Jan 28, 2018 3:15 pm

- Do you see anything in the logging tab after you load the NZB?
- In the NZB options, do you have a filter set to filter read NZB Files?
- When you start Newsbin do you get any error messages?
- What happens if you drag and drop the NZB onto the download list?

You might want to try with 6.80RC4. It's getting close to release.

As far as I know where's no issue reading NZB files right now.
User avatar
Quade
Eternal n00b
Eternal n00b
 
Posts: 44867
Joined: Sat May 19, 2001 12:41 am
Location: Virginia, US

Registered Newsbin User since: 10/24/97

Re: NZB files shows zero headers when loaded

Postby Same Guy » Sun Jan 28, 2018 8:37 pm

Thank you for the fast response.

- Do you see anything in the logging tab after you load the NZB?
No
- In the NZB options, do you have a filter set to filter read NZB Files?
No
- When you start Newsbin do you get any error messages?
No
- What happens if you drag and drop the NZB onto the download list?
Same thing as if I double-clicked an NZB file or dragged it to the download list.

Same results with 6.80RC4. :cry:

I'll email the troublesome NZB to the address listed earlier in this thread along with one that works in case you can see a difference. Since this isn't the first time I've seen this behavior, it would be nice to know the root cause in case it is something I can tweak on my end.
Same Guy
Occasional Contributor
Occasional Contributor
 
Posts: 11
Joined: Tue Oct 24, 2006 8:37 pm

Registered Newsbin User since: 09/05/06

Re: NZB files shows zero headers when loaded

Postby Quade » Sun Jan 28, 2018 9:16 pm

Both of the NZB's I got, assuming it's you, loaded fine in 6.80RC4. One was 6.6 gigs and the other was 10.7 gigs.

I'll ask dex to try them.
User avatar
Quade
Eternal n00b
Eternal n00b
 
Posts: 44867
Joined: Sat May 19, 2001 12:41 am
Location: Virginia, US

Registered Newsbin User since: 10/24/97

Re: NZB files shows zero headers when loaded

Postby Same Guy » Sun Jan 28, 2018 9:39 pm

Yep, that was me and I'm glad I sent the screenshots so you don't think I'm crazy. :lol:

I'm not sure if this matters, but I have Newsbin Pro installed on my D: drive vs my C: drive.
Same Guy
Occasional Contributor
Occasional Contributor
 
Posts: 11
Joined: Tue Oct 24, 2006 8:37 pm

Registered Newsbin User since: 09/05/06

Re: NZB files shows zero headers when loaded

Postby dexter » Sun Jan 28, 2018 11:25 pm

Both worked fine for me. Someone had the same problem a few days ago and it turned out he had locked out the poster. Go under Options -> Settings -> Poster Settings and see if the poster Yenc@power-post.org is in there.
User avatar
dexter
Site Admin
Site Admin
 
Posts: 9511
Joined: Fri May 18, 2001 3:50 pm
Location: Northern Virginia, US

Registered Newsbin User since: 10/24/97

Re: NZB files shows zero headers when loaded

Postby Same Guy » Sun Jan 28, 2018 11:31 pm

dexter wrote:Go under Options -> Settings -> Poster Settings and see if the poster Yenc@power-post.org is in there.


Yes it is, we may have an answer here...how do I unblock that poster? I didn't see a way to do that and even tried to right click the poster's name.
Same Guy
Occasional Contributor
Occasional Contributor
 
Posts: 11
Joined: Tue Oct 24, 2006 8:37 pm

Registered Newsbin User since: 09/05/06

Re: NZB files shows zero headers when loaded

Postby Quade » Sun Jan 28, 2018 11:50 pm

Should be able to select and hit the delete key.
User avatar
Quade
Eternal n00b
Eternal n00b
 
Posts: 44867
Joined: Sat May 19, 2001 12:41 am
Location: Virginia, US

Registered Newsbin User since: 10/24/97

Re: NZB files shows zero headers when loaded

Postby Same Guy » Sun Jan 28, 2018 11:58 pm

You made it too easy... :oops:

The poster filter was the issue, thank you both for your help!
Same Guy
Occasional Contributor
Occasional Contributor
 
Posts: 11
Joined: Tue Oct 24, 2006 8:37 pm

Registered Newsbin User since: 09/05/06


Return to V6 Technical Support

Who is online

Users browsing this forum: No registered users and 2 guests